SPARES2GO Universal Rectangular Terminal Flue Guard Non-Condensing Oil Boiler (11″ X 11″ X 10.5″)

• Manufacturer guarantee-6 months
• Compatible with Non-condensing and Oil Boilers

Features and benefits

SPARES2GO Universal Rectangular Terminal Flue Guard Non-Condensing Oil Boiler

Suitable for non-condensing and oil boilers

Dimensions: Width: 11″ (280mm) — Length: 11″ (280mm) — Depth: 10.5″ (270mm)

Premium quality compatible replacement / spare part

• SPARES2GO Universal Rectangular Terminal Flue Guard Non-Condensing Oil Boiler
• Suitable for non-condensing and oil boilers
• Dimensions: Width: 11″ (280mm) — Length: 11″ (280mm) — Depth: 10.5″ (270mm)
• It is quite easy to set up; simply place the guard over the flue terminal to prevent anyone from coming into contact with it. To tighten the guard, just insert four screws into the provided slots.
• This rectangular terminal guard has JS 500 automotive-grade finishing placed on top of the normal Electro-zinc plate and passivate the surface, coating is an extra layer of defence, which helps resist the corrosive effects of non-condensing oil boiler exhaust gases. It is only appropriate for conventional (non-condensing) oil boiler flues. This product will corrode fast if installed in a condensing boiler flue due to the corrosive effects of condensate in the exhaust gases.
• Building standards, BS5440-1:2008 (section 9.2.1) Where persons could come into contact with the terminal…. A protective guard shall be used. The guard shall be fitted such that no part of the guard is less than 50mm from any part of the terminal….. a suitable guard should be provided whenever a terminal if fitted less than 2.1m above ground, a balcony or a flat roof to which people have access. (For plume management kits)….. Where the inlet is less than 2.0m above ground level, a balcony or a flat roof a protective guard shall be used.
• Premium quality compatible replacement / spare part